/*
Copyright (C) 1996-1997 Id Software, Inc.

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  

See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

*/
// r_bsp.c

#include "quakedef.h"
#include "r_local.h"

//
// current entity info
//
qboolean		insubmodel;
entity_t		*currententity;

#ifdef USE_PQ_OPT1
int				modelorg_fxp[3];
#endif

vec3_t			modelorg, base_modelorg;
								// modelorg is the viewpoint reletive to
								// the currently rendering entity
vec3_t			r_entorigin;	// the currently rendering entity in world
								// coordinates

float			entity_rotation[3][3];

vec3_t			r_worldmodelorg;

int				r_currentbkey;

typedef int solidstate_t;
enum {touchessolid, drawnode, nodrawnode};

#define MAX_BMODEL_VERTS	500			// 6K
#define MAX_BMODEL_EDGES	1000		// 12K

static mvertex_t	*pbverts;
static bedge_t		*pbedges;
static int			numbverts, numbedges;

static mvertex_t	*pfrontenter, *pfrontexit;

static qboolean		makeclippededge;


//===========================================================================

/*
================
R_EntityRotate
================
*/
void R_EntityRotate (vec3_t vec)
{
	vec3_t	tvec;

	VectorCopy (vec, tvec);
	vec[0] = DotProduct (entity_rotation[0], tvec);
	vec[1] = DotProduct (entity_rotation[1], tvec);
	vec[2] = DotProduct (entity_rotation[2], tvec);
}


/*
================
R_RotateBmodel
================
*/
void R_RotateBmodel (void)
{
	float	angle, s, c, temp1[3][3], temp2[3][3], temp3[3][3];

// TODO: should use a look-up table
// TODO: should really be stored with the entity instead of being reconstructed
// TODO: could cache lazily, stored in the entity
// TODO: share work with R_SetUpAliasTransform

// yaw
	angle = currententity->angles[YAW];		
	angle = angle * M_PI*2 / 360;
	s = sin(angle);
	c = cos(angle);

	temp1[0][0] = c;
	temp1[0][1] = s;
	temp1[0][2] = 0;
	temp1[1][0] = -s;
	temp1[1][1] = c;
	temp1[1][2] = 0;
	temp1[2][0] = 0;
	temp1[2][1] = 0;
	temp1[2][2] = 1;


// pitch
	angle = currententity->angles[PITCH];		
	angle = angle * M_PI*2 / 360;
	s = sin(angle);
	c = cos(angle);

	temp2[0][0] = c;
	temp2[0][1] = 0;
	temp2[0][2] = -s;
	temp2[1][0] = 0;
	temp2[1][1] = 1;
	temp2[1][2] = 0;
	temp2[2][0] = s;
	temp2[2][1] = 0;
	temp2[2][2] = c;

	R_ConcatRotations (temp2, temp1, temp3);

// roll
	angle = currententity->angles[ROLL];		
	angle = angle * M_PI*2 / 360;
	s = sin(angle);
	c = cos(angle);

	temp1[0][0] = 1;
	temp1[0][1] = 0;
	temp1[0][2] = 0;
	temp1[1][0] = 0;
	temp1[1][1] = c;
	temp1[1][2] = s;
	temp1[2][0] = 0;
	temp1[2][1] = -s;
	temp1[2][2] = c;

	R_ConcatRotations (temp1, temp3, entity_rotation);

//
// rotate modelorg and the transformation matrix
//
	R_EntityRotate (modelorg);
	R_EntityRotate (vpn);
	R_EntityRotate (vright);
	R_EntityRotate (vup);

	R_TransformFrustum ();
}


/*
================
R_RecursiveClipBPoly
================
*/
void R_RecursiveClipBPoly (bedge_t *pedges, mnode_t *pnode, msurface_t *psurf)
{
	bedge_t		*psideedges[2], *pnextedge, *ptedge;
	int			i, side, lastside;
	float		dist, frac, lastdist;
	mplane_t	*splitplane, tplane;
	mvertex_t	*pvert, *plastvert, *ptvert;
	mnode_t		*pn;

	psideedges[0] = psideedges[1] = NULL;

	makeclippededge = false;

// transform the BSP plane into model space
// FIXME: cache these?
	splitplane = pnode->plane;
	tplane.dist = splitplane->dist -
			DotProduct(r_entorigin, splitplane->normal);
	tplane.normal[0] = DotProduct (entity_rotation[0], splitplane->normal);
	tplane.normal[1] = DotProduct (entity_rotation[1], splitplane->normal);
	tplane.normal[2] = DotProduct (entity_rotation[2], splitplane->normal);

// clip edges to BSP plane
	for ( ; pedges ; pedges = pnextedge)
	{
		pnextedge = pedges->pnext;

	// set the status for the last point as the previous point
	// FIXME: cache this stuff somehow?
		plastvert = pedges->v[0];
		lastdist = DotProduct (plastvert->position, tplane.normal) -
				   tplane.dist;

		if (lastdist > 0)
			lastside = 0;
		else
			lastside = 1;

		pvert = pedges->v[1];

		dist = DotProduct (pvert->position, tplane.normal) - tplane.dist;

		if (dist > 0)
			side = 0;
		else
			side = 1;

		if (side != lastside)
		{
		// clipped
			if (numbverts >= MAX_BMODEL_VERTS)
				return;

		// generate the clipped vertex
			frac = lastdist / (lastdist - dist);
			ptvert = &pbverts[numbverts++];
			ptvert->position[0] = plastvert->position[0] +
					frac * (pvert->position[0] -
					plastvert->position[0]);
			ptvert->position[1] = plastvert->position[1] +
					frac * (pvert->position[1] -
					plastvert->position[1]);
			ptvert->position[2] = plastvert->position[2] +
					frac * (pvert->position[2] -
					plastvert->position[2]);

		// split into two edges, one on each side, and remember entering
		// and exiting points
		// FIXME: share the clip edge by having a winding direction flag?
			if (numbedges >= (MAX_BMODEL_EDGES - 1))
			{
				Con_Printf ("Out of edges for bmodel\n");
				return;
			}

			ptedge = &pbedges[numbedges];
			ptedge->pnext = psideedges[lastside];
			psideedges[lastside] = ptedge;
			ptedge->v[0] = plastvert;
			ptedge->v[1] = ptvert;

			ptedge = &pbedges[numbedges + 1];
			ptedge->pnext = psideedges[side];
			psideedges[side] = ptedge;
			ptedge->v[0] = ptvert;
			ptedge->v[1] = pvert;

			numbedges += 2;

			if (side == 0)
			{
			// entering for front, exiting for back
				pfrontenter = ptvert;
				makeclippededge = true;
			}
			else
			{
				pfrontexit = ptvert;
				makeclippededge = true;
			}
		}
		else
		{
		// add the edge to the appropriate side
			pedges->pnext = psideedges[side];
			psideedges[side] = pedges;
		}
	}

// if anything was clipped, reconstitute and add the edges along the clip
// plane to both sides (but in opposite directions)
	if (makeclippededge)
	{
		if (numbedges >= (MAX_BMODEL_EDGES - 2))
		{
			Con_Printf ("Out of edges for bmodel\n");
			return;
		}

		ptedge = &pbedges[numbedges];
		ptedge->pnext = psideedges[0];
		psideedges[0] = ptedge;
		ptedge->v[0] = pfrontexit;
		ptedge->v[1] = pfrontenter;

		ptedge = &pbedges[numbedges + 1];
		ptedge->pnext = psideedges[1];
		psideedges[1] = ptedge;
		ptedge->v[0] = pfrontenter;
		ptedge->v[1] = pfrontexit;

		numbedges += 2;
	}

// draw or recurse further
	for (i=0 ; i<2 ; i++)
	{
		if (psideedges[i])
		{
		// draw if we've reached a non-solid leaf, done if all that's left is a
		// solid leaf, and continue down the tree if it's not a leaf
			pn = pnode->children[i];

		// we're done with this branch if the node or leaf isn't in the PVS
			if (pn->visframe == r_visframecount)
			{
				if (pn->contents < 0)
				{
					if (pn->contents != CONTENTS_SOLID)
					{
						r_currentbkey = ((mleaf_t *)pn)->key;
						R_RenderBmodelFace (psideedges[i], psurf);
					}
				}
				else
				{
					R_RecursiveClipBPoly (psideedges[i], pnode->children[i],
									  psurf);
				}
			}
		}
	}
}


/*
================
R_DrawSolidClippedSubmodelPolygons
================
*/
void R_DrawSolidClippedSubmodelPolygons (model_t *pmodel)
{
	int			i, j, lindex;
	vec_t		dot;
	msurface_t	*psurf;
	int			numsurfaces;
	mplane_t	*pplane;
	mvertex_t	bverts[MAX_BMODEL_VERTS];
	bedge_t		bedges[MAX_BMODEL_EDGES], *pbedge;
	medge_t		*pedge, *pedges;

// FIXME: use bounding-box-based frustum clipping info?

	psurf = &pmodel->surfaces[pmodel->firstmodelsurface];
	numsurfaces = pmodel->nummodelsurfaces;
	pedges = pmodel->edges;

	for (i=0 ; i<numsurfaces ; i++, psurf++)
	{
	// find which side of the node we are on
		pplane = psurf->plane;

		dot = DotProduct (modelorg, pplane->normal) - pplane->dist;

	// draw the polygon
		if (((psurf->flags & SURF_PLANEBACK) && (dot < -BACKFACE_EPSILON)) ||
			(!(psurf->flags & SURF_PLANEBACK) && (dot > BACKFACE_EPSILON)))
		{
		// FIXME: use bounding-box-based frustum clipping info?

		// copy the edges to bedges, flipping if necessary so always
		// clockwise winding
		// FIXME: if edges and vertices get caches, these assignments must move
		// outside the loop, and overflow checking must be done here
			pbverts = bverts;
			pbedges = bedges;
			numbverts = numbedges = 0;

			if (psurf->numedges > 0)
			{
				pbedge = &bedges[numbedges];
				numbedges += psurf->numedges;

				for (j=0 ; j<psurf->numedges ; j++)
				{
				   lindex = pmodel->surfedges[psurf->firstedge+j];

					if (lindex > 0)
					{
						pedge = &pedges[lindex];
						pbedge[j].v[0] = &r_pcurrentvertbase[pedge->v[0]];
						pbedge[j].v[1] = &r_pcurrentvertbase[pedge->v[1]];
					}
					else
					{
						lindex = -lindex;
						pedge = &pedges[lindex];
						pbedge[j].v[0] = &r_pcurrentvertbase[pedge->v[1]];
						pbedge[j].v[1] = &r_pcurrentvertbase[pedge->v[0]];
					}

					pbedge[j].pnext = &pbedge[j+1];
				}

				pbedge[j-1].pnext = NULL;	// mark end of edges

				R_RecursiveClipBPoly (pbedge, currententity->topnode, psurf);
			}
			else
			{
				Sys_Error ("no edges in bmodel");
			}
		}
	}
}


/*
================
R_DrawSubmodelPolygons
================
*/
void R_DrawSubmodelPolygons (model_t *pmodel, int clipflags)
{
	int			i;
	vec_t		dot;
	msurface_t	*psurf;
	int			numsurfaces;
	mplane_t	*pplane;

// FIXME: use bounding-box-based frustum clipping info?

	psurf = &pmodel->surfaces[pmodel->firstmodelsurface];
	numsurfaces = pmodel->nummodelsurfaces;

	for (i=0 ; i<numsurfaces ; i++, psurf++)
	{
	// find which side of the node we are on
		pplane = psurf->plane;

		dot = DotProduct (modelorg, pplane->normal) - pplane->dist;

	// draw the polygon
		if (((psurf->flags & SURF_PLANEBACK) && (dot < -BACKFACE_EPSILON)) ||
			(!(psurf->flags & SURF_PLANEBACK) && (dot > BACKFACE_EPSILON)))
		{
			r_currentkey = ((mleaf_t *)currententity->topnode)->key;

		// FIXME: use bounding-box-based frustum clipping info?
			R_RenderFace (psurf, clipflags);
		}
	}
}

#ifdef USE_PQ_OPT1
int			clipplanes_fxp[4][3];
int			clipdist_fxp[4];
#endif

/*
================
R_RecursiveWorldNode
================
*/
void R_RecursiveWorldNode (mnode_t *node, int clipflags)
{
	int			i, c, side, *pindex;
	mplane_t	*plane;
	msurface_t	*surf, **mark;
	mleaf_t		*pleaf;
	double		dot;
#ifdef USE_PQ_OPT1
	int			d_fxp;
#else
	double		d;
	vec3_t		acceptpt, rejectpt;
#endif

	if (node->contents == CONTENTS_SOLID)
		return;		// solid

	if (node->visframe != r_visframecount)
		return;

// cull the clipping planes if not trivial accept
// FIXME: the compiler is doing a lousy job of optimizing here; it could be
//  twice as fast in ASM
	if (clipflags)
	{
		for (i=0 ; i<4 ; i++)
		{
			if (! (clipflags & (1<<i)) )
				continue;	// don't need to clip against it

		// generate accept and reject points
		// FIXME: do with fast look-ups or integer tests based on the sign bit
		// of the floating point values

			pindex = pfrustum_indexes[i];

#ifdef USE_PQ_OPT1
			d_fxp=node->minmaxs[pindex[0]]*clipplanes_fxp[i][0]+node->minmaxs[pindex[1]]*clipplanes_fxp[i][1]+node->minmaxs[pindex[2]]*clipplanes_fxp[i][2];
			d_fxp-=clipdist_fxp[i];

			if (d_fxp <= 0) 
				return;
							
			d_fxp=node->minmaxs[pindex[3]]*clipplanes_fxp[i][0]+node->minmaxs[pindex[4]]*clipplanes_fxp[i][1]+node->minmaxs[pindex[5]]*clipplanes_fxp[i][2];
			d_fxp-=clipdist_fxp[i];

			if (d_fxp >= 0)
				clipflags &= ~(1<<i);	// node is entirely on screen
#else
			rejectpt[0] = (float)node->minmaxs[pindex[0]];
			rejectpt[1] = (float)node->minmaxs[pindex[1]];
			rejectpt[2] = (float)node->minmaxs[pindex[2]];

			d = DotProduct (rejectpt, view_clipplanes[i].normal);
			d -= view_clipplanes[i].dist;

			if (d <= 0) 
				return;
							
			acceptpt[0] = (float)node->minmaxs[pindex[3+0]];
			acceptpt[1] = (float)node->minmaxs[pindex[3+1]];
			acceptpt[2] = (float)node->minmaxs[pindex[3+2]];

			d = DotProduct (acceptpt, view_clipplanes[i].normal);
			d -= view_clipplanes[i].dist;

			if (d >= 0)
				clipflags &= ~(1<<i);	// node is entirely on screen
#endif
		}
	}
	
// if a leaf node, draw stuff
	if (node->contents < 0)
	{
		pleaf = (mleaf_t *)node;

		mark = pleaf->firstmarksurface;
		c = pleaf->nummarksurfaces;

		if (c)
		{
			do
			{
				(*mark)->visframe = r_framecount;
				mark++;
			} while (--c);
		}

	// deal with model fragments in this leaf
		if (pleaf->efrags)
		{
			R_StoreEfrags (&pleaf->efrags);
		}

		pleaf->key = r_currentkey;
		r_currentkey++;		// all bmodels in a leaf share the same key
	}
	else
	{
	// node is just a decision point, so go down the apropriate sides

	// find which side of the node we are on
		plane = node->plane;

		switch (plane->type)
		{
		case PLANE_X:
			dot = modelorg[0] - plane->dist;
			break;
		case PLANE_Y:
			dot = modelorg[1] - plane->dist;
			break;
		case PLANE_Z:
			dot = modelorg[2] - plane->dist;
			break;
		default:
			dot = DotProduct (modelorg, plane->normal) - plane->dist;
			break;
		}
	
		if (dot >= 0)
			side = 0;
		else
			side = 1;

	// recurse down the children, front side first
		R_RecursiveWorldNode (node->children[side], clipflags);

	// draw stuff
		c = node->numsurfaces;

		if (c)
		{
			surf = cl.worldmodel->surfaces + node->firstsurface;

			if (dot < -BACKFACE_EPSILON)
			{
				do
				{
					if ((surf->flags & SURF_PLANEBACK) &&
						(surf->visframe == r_framecount))
					{
						if (r_drawpolys)
						{
							if (r_worldpolysbacktofront)
							{
								if (numbtofpolys < MAX_BTOFPOLYS)
								{
									pbtofpolys[numbtofpolys].clipflags =
											clipflags;
									pbtofpolys[numbtofpolys].psurf = surf;
									numbtofpolys++;
								}
							}
							else
							{
								R_RenderPoly (surf, clipflags);
							}
						}
						else
						{
							R_RenderFace (surf, clipflags);
						}
					}

					surf++;
				} while (--c);
			}
			else if (dot > BACKFACE_EPSILON)
			{
				do
				{
					if (!(surf->flags & SURF_PLANEBACK) &&
						(surf->visframe == r_framecount))
					{
						if (r_drawpolys)
						{
							if (r_worldpolysbacktofront)
							{
								if (numbtofpolys < MAX_BTOFPOLYS)
								{
									pbtofpolys[numbtofpolys].clipflags =
											clipflags;
									pbtofpolys[numbtofpolys].psurf = surf;
									numbtofpolys++;
								}
							}
							else
							{
								R_RenderPoly (surf, clipflags);
							}
						}
						else
						{
							R_RenderFace (surf, clipflags);
						}
					}

					surf++;
				} while (--c);
			}

		// all surfaces on the same node share the same sequence number
			r_currentkey++;
		}

	// recurse down the back side
		R_RecursiveWorldNode (node->children[!side], clipflags);
	}
}



/*
================
R_RenderWorld
================
*/
void R_RenderWorld (void)
{
	int			i;
	model_t		*clmodel;
	btofpoly_t	btofpolys[MAX_BTOFPOLYS];

	pbtofpolys = btofpolys;

	currententity = &cl_entities[0];
	VectorCopy (r_origin, modelorg);

#ifdef USE_PQ_OPT1
	modelorg_fxp[0]=(int)(r_origin[0]*524288.0);
	modelorg_fxp[1]=(int)(r_origin[1]*524288.0);
	modelorg_fxp[2]=(int)(r_origin[2]*524288.0);

	//modelorg_fxp[0]=(int)(r_origin[0]*65536.0);
	//modelorg_fxp[1]=(int)(r_origin[1]*65536.0);
	//modelorg_fxp[2]=(int)(r_origin[2]*65536.0);

	vright_fxp[0]=(int)(256.0/vright[0]);
	if (!vright_fxp[0]) vright_fxp[0]=0x7fffffff;
	vright_fxp[1]=(int)(256.0/vright[1]);
	if (!vright_fxp[1]) vright_fxp[1]=0x7fffffff;
	vright_fxp[2]=(int)(256.0/vright[2]);
	if (!vright_fxp[2]) vright_fxp[2]=0x7fffffff;

	vpn_fxp[0]=(int)(256.0/vpn[0]);
	if (!vpn_fxp[0]) vpn_fxp[0]=0x7fffffff;
	vpn_fxp[1]=(int)(256.0/vpn[1]);
	if (!vpn_fxp[1]) vpn_fxp[1]=0x7fffffff;
	vpn_fxp[2]=(int)(256.0/vpn[2]);
	if (!vpn_fxp[2]) vpn_fxp[2]=0x7fffffff;

	vup_fxp[0]=(int)(256.0/vup[0]);
	if (!vup_fxp[0]) vup_fxp[0]=0x7fffffff;
	vup_fxp[1]=(int)(256.0/vup[1]);
	if (!vup_fxp[1]) vup_fxp[1]=0x7fffffff;
	vup_fxp[2]=(int)(256.0/vup[2]);
	if (!vup_fxp[2]) vup_fxp[2]=0x7fffffff;

#endif

        
	clmodel = currententity->model;
	r_pcurrentvertbase = clmodel->vertexes;

#ifdef USE_PQ_OPT2
	r_pcurrentvertbase_fxp = clmodel->vertexes_fxp;
#endif
#ifdef USE_PQ_OPT1
	//Dan Fixed point conversion stuff
	for (i=0; i<4; i++) {
		clipplanes_fxp[i][0]=(int)(view_clipplanes[i].normal[0]*65536.0);
		clipplanes_fxp[i][1]=(int)(view_clipplanes[i].normal[1]*65536.0);
		clipplanes_fxp[i][2]=(int)(view_clipplanes[i].normal[2]*65536.0);
		clipdist_fxp[i]		=(int)(view_clipplanes[i].dist*65536.0);
#ifdef USE_PQ_OPT2
		view_clipplanes_fxp[i].leftedge=view_clipplanes[i].leftedge;
		view_clipplanes_fxp[i].rightedge=view_clipplanes[i].rightedge;
		if (!view_clipplanes[i].normal[0]) view_clipplanes_fxp[i].normal[0]=2<<29;
		else view_clipplanes_fxp[i].normal[0]=(int)(4096.0f/view_clipplanes[i].normal[0]);
		if (!view_clipplanes[i].normal[0]) view_clipplanes_fxp[i].normal[0]=2<<29;

		if (!view_clipplanes[i].normal[1]) view_clipplanes_fxp[i].normal[1]=2<<29;
		else view_clipplanes_fxp[i].normal[1]=(int)(4096.0f/view_clipplanes[i].normal[1]);
		if (!view_clipplanes[i].normal[1]) view_clipplanes_fxp[i].normal[1]=2<<29;

		if (!view_clipplanes[i].normal[2]) view_clipplanes_fxp[i].normal[2]=2<<29;
		else view_clipplanes_fxp[i].normal[2]=(int)(4096.0f/view_clipplanes[i].normal[2]);
		if (!view_clipplanes[i].normal[2]) view_clipplanes_fxp[i].normal[2]=2<<29;

		view_clipplanes_fxp[i].dist=(int)(view_clipplanes[i].dist*128.0f);
#endif
#if defined(_X86_)&&defined(DEBUG)
		LogFloat(view_clipplanes[i].normal[0], "view_clipplanes[i].normal[0]", i, -1);
		LogFloat(view_clipplanes[i].normal[1], "view_clipplanes[i].normal[1]", i, -1);
		LogFloat(view_clipplanes[i].normal[2], "view_clipplanes[i].normal[2]", i, -1);
#endif
	}
#endif
	
	R_RecursiveWorldNode (clmodel->nodes, 15);	

// if the driver wants the polygons back to front, play the visible ones back
// in that order
	if (r_worldpolysbacktofront)
	{
		for (i=numbtofpolys-1 ; i>=0 ; i--)
		{
			R_RenderPoly (btofpolys[i].psurf, btofpolys[i].clipflags);
		}
	}
}


