/*
 * This config file is for the FiiO M3K (Linux version)
 */

/* For Rolo and boot loader */
#define MODEL_NUMBER 112

#define MODEL_NAME   "FiiO M3K"

/* LCD dimensions */
#define LCD_WIDTH  240
#define LCD_HEIGHT 320
/* sqrt(240^2 + 320^2) / 2.0 = 200 */
#define LCD_DPI 200

#ifndef SIMULATOR
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
#define PIVOT_ROOT "/mnt"
#endif

#define HAVE_FPU

#define HW_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_48 | SAMPR_CAP_88 | SAMPR_CAP_96 | SAMPR_CAP_176 | SAMPR_CAP_192)

/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

#define LCD_DEPTH  16
/* Check that but should not matter */
#define LCD_PIXELFORMAT RGB565

#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS

/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
#define HAVE_BUTTONLIGHT_BRIGHTNESS

/* We have a touchpad */
#define HAVE_TOUCHPAD

/* Main LCD backlight brightness range and defaults: the backlight driver
 * has levels from 0 to 32. But 0 is off so start at 1.
 */
#define MIN_BRIGHTNESS_SETTING      1
#define MAX_BRIGHTNESS_SETTING      255
#define BRIGHTNESS_STEP             5
#define DEFAULT_BRIGHTNESS_SETTING  70

/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING

/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_HOSTED

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000

#define HAVE_HEADPHONE_DETECTION

/* KeyPad configuration for plugins */
#define CONFIG_KEYPAD FIIO_M3K_LINUX_PAD

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY

/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST

#ifndef SIMULATOR
/* We have usb power and can detect usb but it is handled by Linux */
#define HAVE_USB_POWER

#endif

#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE

/* Linux controlls charging, we can monitor */
#define CONFIG_CHARGING CHARGING_MONITOR

/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING

/* same dimensions as gigabeats */
#define CONFIG_LCD LCD_INGENIC_LINUX

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* Define this to the CPU frequency */
#define CPU_FREQ            1008000000

/* No special storage */
#define CONFIG_STORAGE STORAGE_HOSTFS
#define HAVE_STORAGE_FLUSH

/* Audio codec */
#define HAVE_FIIO_LINUX_CODEC
#define HAVE_ALSA_32BIT

/* We don't have hardware controls */
#define HAVE_SW_TONE_CONTROLS

/* Battery */
#define BATTERY_CAPACITY_DEFAULT 1100 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1100  /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 1100 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0   /* capacity increment */

/* Voltage reported in millivolts */
#define BATTERY_VOLTAGE_SCALE_MUL 1
#define BATTERY_VOLTAGE_SCALE_DIV 1

/* Capacity reported as a value 0-5, 20% increments */
#define BATTERY_LEVEL_SCALE_MUL 20
#define BATTERY_LEVEL_SCALE_DIV 1

/* ROLO */
#define BOOTFILE_EXT "m3k"
#define BOOTFILE     "rockbox." BOOTFILE_EXT
#define BOOTDIR      "/.rockbox"

/* More stuff */
#define BATTERY_DEV_NAME "battery"
#define POWER_DEV_NAME "ac"