/* * This config file is for iAudio X5 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 10 #define MODEL_NAME "iAudio X5" /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 160 #define LCD_HEIGHT 128 /* sqrt(160^2 + 128^2) / 1.8 = 113.8 */ #define LCD_DPI 114 #define LCD_DEPTH 16 /* pseudo 262.144 colors */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* remote LCD */ #define LCD_REMOTE_WIDTH 128 #define LCD_REMOTE_HEIGHT 96 #define LCD_REMOTE_DEPTH 2 #define LCD_REMOTE_PIXELFORMAT VERTICAL_INTERLEAVED /* Remote display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_REMOTE_DARKCOLOR 0x000000 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a #define LCD_REMOTE_BL_DARKCOLOR 0x000000 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa #ifndef BOOTLOADER /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING #endif #define CONFIG_KEYPAD IAUDIO_X5M5_PAD #define CONFIG_REMOTE_KEYPAD IAUDIO_REMOTE /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT #define AB_REPEAT_ENABLE #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50606 /* define this if you have a real-time clock alarm */ #define HAVE_RTC_ALARM /* Define this if you have an remote lcd */ #define HAVE_REMOTE_LCD #define CONFIG_LCD LCD_X5 /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* FM Tuner */ #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 #define HAVE_TLV320 /* TLV320 has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS #define BATTERY_CAPACITY_DEFAULT 950 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 950 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 2250 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging? FIXME */ #define CONFIG_CHARGING CHARGING_SIMPLE /* define current usage levels */ #define CURRENT_NORMAL 65 /*2250mah/35h = 65 ma*/ #define CURRENT_BACKLIGHT 25 #define CURRENT_REMOTE 8 /* additional current when remote connected */ #define CURRENT_RECORD 2 /* FIXME: placeholder value */ /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST /* Define this if you have a Motorola SCF5250 */ #define CONFIG_CPU MCF5250 /* Define this if you want to use coldfire's i2c interface */ #define CONFIG_I2C I2C_COLDFIRE /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_M5636 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "iaudio" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define BOOTLOADER_ENTRYPOINT 0x001F0000 #define FLASH_RAMIMAGE_ENTRY 0x00001000 #define FLASH_ROMIMAGE_ENTRY 0x00100000 #define FLASH_MAGIC 0xfbfbfbf1 /* Define this for FM radio input available */ #define HAVE_FMRADIO_IN /** Port-specific settings **/ /* Main LCD contrast range and defaults */ #define MIN_CONTRAST_SETTING 1 #define MAX_CONTRAST_SETTING 30 #define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */ /* Main LCD backlight brightness range and defaults */ /* PCF50506 can output 0%-100% duty cycle but D305A expects %15-100%. */ #define MIN_BRIGHTNESS_SETTING 1 /* 15/16 (93.75%) */ #define MAX_BRIGHTNESS_SETTING 13 /* 3/16 (18.75%) */ #define DEFAULT_BRIGHTNESS_SETTING 8 /* 8/16 (50.00%) = x5 boot default */ /* Remote LCD contrast range and defaults */ #define MIN_REMOTE_CONTRAST_SETTING 10 #define MAX_REMOTE_CONTRAST_SETTING 35 #define DEFAULT_REMOTE_CONTRAST_SETTING 24 /* Match boot contrast */ /* Define this if a programmable hotkey is mapped */ //#define HAVE_HOTKEY