/* * This config file is for the Apple iPod Video */ #define IPOD_ARCH 1 #define MODEL_NAME "Apple iPod Video" /* For Rolo and boot loader */ #define MODEL_NUMBER 5 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /* define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have recording possibility */ #define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS HW_SAMPR_CAPS /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 320 #define LCD_HEIGHT 240 /* sqrt(320^2 + 240^2) / 2.5 = 160.0 */ #define LCD_DPI 160 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* LCD stays visible without backlight - simulator hint */ #define HAVE_TRANSFLECTIVE_LCD #define CONFIG_KEYPAD IPOD_4G_PAD /* Define this to have CPU boosted while scrolling in the UI */ #define HAVE_GUI_BOOST /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50605 /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this if you can switch on/off the accessory power supply */ #define HAVE_ACCESSORY_SUPPLY /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 /* Define this if you have the WM8758 audio codec */ #define HAVE_WM8758 #define AB_REPEAT_ENABLE #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS #ifndef BOOTLOADER /* Support for LCD sleep/BCM shutdown */ #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING /* The same code may also be used when shutting down the iPod */ #define HAVE_LCD_SHUTDOWN #endif /* We can fade the backlight by using PWM */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 32 #define DEFAULT_BRIGHTNESS_SETTING 16 /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* define to activate advanced wheel acceleration code */ #define HAVE_WHEEL_ACCELERATION /* define from which rotation speed [degree/sec] on the acceleration starts */ #define WHEEL_ACCEL_START 270 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ #define WHEEL_ACCELERATION 3 /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION /* Type of mobile power */ #define BATTERY_CAPACITY_DEFAULT 400 /* only for variable initialisation */ #define BATTERY_CAPACITY_DEFAULT_THIN 400 /* default battery capacity for the 30GB model */ #define BATTERY_CAPACITY_DEFAULT_THICK 600 /* default battery capacity for the 60/80GB model */ #define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3000 /* max. capacity selectable -- 3rd party batteries go this high */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* define this if the unit can have USB charging disabled by user - * if USB/MAIN power is discernable and hardware doesn't compel charging */ #define HAVE_USB_CHARGING_ENABLE #define TARGET_USB_CHARGING_DEFAULT USB_CHARGING_FORCE /* define current usage levels */ #define CURRENT_NORMAL 24 /* 30MHz clock, LCD off, accessory supply on */ #define CURRENT_BACKLIGHT 20 /* FIXME: this needs adjusting */ #if defined(HAVE_RECORDING) #define CURRENT_RECORD 35 /* FIXME: this needs adjusting */ #endif /* Define Apple remote tuner */ #define CONFIG_TUNER IPOD_REMOTE_TUNER #define HAVE_RDS_CAP #define CONFIG_RDS RDS_CFG_PUSH /* Define this if you have a PortalPlayer PP5022 */ #define CONFIG_CPU PP5022 /* Define this if you want to use the PP5020 i2c interface */ #define CONFIG_I2C I2C_PP5020 /* We're able to shut off power to the HDD */ #define HAVE_ATA_POWER_OFF /* Turn on SMART support */ #define HAVE_ATA_SMART /* define this if the hardware can be powered off while charging */ //#define HAVE_POWEROFF_WHILE_CHARGING /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* The size of the flash ROM */ #define FLASH_SIZE 0x100000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 #define CONFIG_LCD LCD_IPODVIDEO /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_VENDOR_ID 0x05ac #define USB_PRODUCT_ID 0x1209 #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Define this if you can read an absolute wheel position */ #define HAVE_WHEEL_POSITION #define HAVE_HARDWARE_CLICK /* define this if the device has larger sectors when accessed via USB */ #define MAX_VIRT_SECTOR_SIZE 2048 /* If we have no valid paritions, advertise this as our sector size */ #define DEFAULT_VIRT_SECTOR_SIZE 2048 /* define this if the hard drive uses large physical sectors (ATA-7 feature) */ /* and doesn't handle them in the drive firmware */ #define MAX_PHYS_SECTOR_SIZE 1024 /* define this if we want to support 512n and 4Kn drives */ //#define MAX_VARIABLE_LOG_SECTOR 4096 #define BOOTFILE_EXT "ipod" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define IPOD_ACCESSORY_PROTOCOL #define HAVE_SERIAL /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ #ifndef BOOTLOADER #define HAVE_ATA_DMA #endif /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY