/* * This config file is for iriver H320, H340 */ #define IRIVER_H300_SERIES 1 #define MODEL_NAME "iriver H300 series" /* For Rolo and boot loader */ #define MODEL_NUMBER 2 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 220 #define LCD_HEIGHT 176 /* sqrt(220^2 + 176^2) / 2.0 = 140.9 */ #define LCD_DPI 141 #define LCD_DEPTH 16 /* 65k colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* remote LCD */ #define LCD_REMOTE_WIDTH 128 #define LCD_REMOTE_HEIGHT 64 #define LCD_REMOTE_DEPTH 1 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING /* Remote display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_REMOTE_DARKCOLOR 0x000000 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a #define LCD_REMOTE_BL_DARKCOLOR 0x000000 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa #define CONFIG_KEYPAD IRIVER_H300_PAD #define CONFIG_REMOTE_KEYPAD H300_REMOTE /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_PCF50606 /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this if you have an remote lcd */ #define HAVE_REMOTE_LCD /* Define if we have a hardware defect that causes ticking on the audio line */ #define HAVE_REMOTE_LCD_TICKING /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define AB_REPEAT_ENABLE #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 #define HAVE_UDA1380 /* define this if you have recording possibility */ #define HAVE_RECORDING #define HAVE_HISTOGRAM /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) /* define hardware samples rate caps mask */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) #define HAVE_AGC #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 50 /* capacity increment */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* define current usage levels */ #define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery from IriverRuntime wiki page */ #define CURRENT_BACKLIGHT 23 /* FIXME: This needs to be measured, copied from H100 */ #define CURRENT_RECORD 110 /* additional current while recording */ #define CURRENT_MAX_CHG 650 /* maximum charging current */ #define CURRENT_REMOTE 8 /* additional current when remote connected */ /* define this if the unit can have USB charging disabled by user - * if USB/MAIN power is discernable and hardware doesn't compel charging */ #define HAVE_USB_CHARGING_ENABLE /* Define this if you have a Motorola SCF5249 */ #define CONFIG_CPU MCF5249 /* Define this if you want to use coldfire's i2c interface */ #define CONFIG_I2C I2C_COLDFIRE /* Define this if you can run rockbox from flash memory */ #define HAVE_FLASHED_ROCKBOX /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 11289600 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF #define CONFIG_LCD LCD_H300 /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ISP1362 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "iriver" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define FLASH_BASE 0x00000000 #define BOOTLOADER_ENTRYPOINT 0x003F0000 #define FLASH_RAMIMAGE_ENTRY 0x00001000 #define FLASH_ROMIMAGE_ENTRY 0x00200000 #define FLASH_MAGIC 0xfbfbfbf1 /* Define this if there is an EEPROM chip */ #define HAVE_EEPROM /* Define this if the EEPROM chip is used */ #define HAVE_EEPROM_SETTINGS /* Define this for FM radio input available */ #define HAVE_FMRADIO_IN /** Port-specific settings **/ /* Main LCD contrast range and defaults */ #define MIN_CONTRAST_SETTING 5 #define MAX_CONTRAST_SETTING 63 #define DEFAULT_CONTRAST_SETTING 40 /* Main LCD backlight brightness range and defaults */ /* accepts 0..15 but note that 0 and 1 give a black display on H300! */ #define MIN_BRIGHTNESS_SETTING 2 /* 2/16 (12.50%) */ #define MAX_BRIGHTNESS_SETTING 15 /* 15/16 (93.75%) */ #define DEFAULT_BRIGHTNESS_SETTING 9 /* 9/16 (56.25%) */ /* Remote LCD contrast range and defaults */ #define MIN_REMOTE_CONTRAST_SETTING 5 #define MAX_REMOTE_CONTRAST_SETTING 63 #define DEFAULT_REMOTE_CONTRAST_SETTING 42 /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY