/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * Copyright (C) 2007 by Karl Kurbjun * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * This config file is for the M:Robe 500i */ /* This is the absolute address on the bus */ #define CONFIG_SDRAM_START 0x00900000 #define OLYMPUS_MROBE_500 1 #define MODEL_NAME "Olympus M:Robe 500i" /* For Rolo and boot loader */ #define MODEL_NUMBER 22 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* Define this to add support for ATA DMA */ //#define HAVE_ATA_DMA /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* LCD dimensions */ #define CONFIG_LCD LCD_MROBE500 /* These defines are used internal to this header */ #define _LCD_RES_QVGA 1 #define _LCD_RES_VGA 2 #define _LCD_PORTRAIT 1 #define _LCD_LANDSCAPE 2 /* Setup the resolution and orientation */ #define _RESOLUTION _LCD_RES_VGA #define _ORIENTATION _LCD_LANDSCAPE #if _RESOLUTION == _LCD_RES_VGA #define LCD_NATIVE_WIDTH 480 #define LCD_NATIVE_HEIGHT 640 #define LCD_DPI 216 #else #define LCD_NATIVE_WIDTH 240 #define LCD_NATIVE_HEIGHT 320 #define LCD_DPI 108 #endif /* choose the lcd orientation. CONFIG_ORIENTATION defined in config.h */ #if _ORIENTATION == _LCD_PORTRAIT /* This is the Portrait setup */ #define LCD_WIDTH LCD_NATIVE_WIDTH #define LCD_HEIGHT LCD_NATIVE_HEIGHT #else /* Frame buffer stride */ #define LCD_STRIDEFORMAT VERTICAL_STRIDE /* This is the Landscape setup */ #define LCD_WIDTH LCD_NATIVE_HEIGHT #define LCD_HEIGHT LCD_NATIVE_WIDTH #endif #define LCD_DEPTH 16 /* 65k colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING /* remote LCD */ #define HAVE_REMOTE_LCD #define LCD_REMOTE_WIDTH 79 #define LCD_REMOTE_HEIGHT 16 #define LCD_REMOTE_DEPTH 1 /* Remote display colours, for screenshots and sim (0xRRGGBB) */ #define LCD_REMOTE_DARKCOLOR 0x000000 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a #define LCD_REMOTE_BL_DARKCOLOR 0x000000 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING #define CONFIG_REMOTE_KEYPAD MROBE_REMOTE #define MIN_REMOTE_CONTRAST_SETTING 0 #define MAX_REMOTE_CONTRAST_SETTING 15 #define DEFAULT_REMOTE_CONTRAST_SETTING 7 #define CONFIG_KEYPAD MROBE500_PAD #define HAVE_TOUCHSCREEN #define HAVE_BUTTON_DATA /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST //#define HAVE_HARDWARE_BEEP /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_RX5X348AB /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 0 #define MAX_BRIGHTNESS_SETTING 127 #define DEFAULT_BRIGHTNESS_SETTING 85 /* OF "full brightness" */ #define DEFAULT_DIMNESS_SETTING 22 /* OF "most dim" */ /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #if LCD_NATIVE_WIDTH < 480 #define PLUGIN_BUFFER_SIZE 0x100000 #else /* THe larger screen needs larger bitmaps in plugins */ #define PLUGIN_BUFFER_SIZE 0x200000 #endif #define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 1000 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 100 /* capacity increment */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* define current usage levels */ #define CURRENT_NORMAL 85 /* Measured */ #define CURRENT_BACKLIGHT 200 /* Over 200 mA total measured when on */ #define CURRENT_REMOTE 2 /* FIXME: placeholder value */ /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* Define this if you have a Texas Instruments TSC2100 touch screen */ #define HAVE_TSC2100 /* M66591 register base */ #define M66591_BASE 0x60000000 /* enable these for the usb stack */ #define CONFIG_USBOTG USBOTG_M66591 #define HAVE_USBSTACK #define HAVE_BOOTLOADER_USB_MODE //#define HAVE_USB_POWER //#define USBPOWER_BUTTON BUTTON_POWER //#define USBPOWER_BTN_IGNORE BUTTON_TOUCH /* usb stack and driver settings */ #define USB_NUM_ENDPOINTS 7 #define USB_VENDOR_ID 0x07b4 #define USB_PRODUCT_ID 0x0281 #define HAVE_USB_HID_MOUSE /* Define this if hardware supports alternate blitting */ #define HAVE_LCD_MODES (LCD_MODE_RGB565 | LCD_MODE_YUV | LCD_MODE_PAL256) #define CONFIG_CPU DM320 #define CONFIG_I2C I2C_DM320 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 87500000 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "mrobe500" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY