/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * Copyright (C) 2011 by Tomasz Moń * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * This config file is for the Sansa Connect */ /* This is the absolute address on the bus set by OF bootloader */ #define CONFIG_SDRAM_START 0x01000000 #define SANSA_CONNECT 1 #define MODEL_NAME "Sandisk Sansa Connect" /* For Rolo and boot loader */ #define MODEL_NUMBER 81 /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if you use an SD controller */ #define CONFIG_STORAGE STORAGE_SD #define HAVE_MULTIDRIVE #define NUM_DRIVES 2 #define HAVE_HOTSWAP #define HAVE_HOTSWAP_STORAGE_AS_MAIN /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* LCD dimensions */ #define CONFIG_LCD LCD_CONNECT #define LCD_WIDTH 240 #define LCD_HEIGHT 320 /* sqrt(240^2 + 320^2) / 2.2 = 181.8 */ #define LCD_DPI 182 #define LCD_DEPTH 16 /* 65k colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ #define HAVE_LCD_ENABLE #define HAVE_LCD_SLEEP #define HAVE_LCD_SHUTDOWN #define LCD_SLEEP_TIMEOUT (2*HZ) #define MAX_ICON_HEIGHT 35 #define MAX_ICON_WIDTH 35 #define CONFIG_KEYPAD SANSA_CONNECT_PAD /* Define this to have CPU bootsted while scrolling in the UI */ #define HAVE_GUI_BOOST /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST #define HAVE_MORSE_INPUT //#define HAVE_HARDWARE_BEEP /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS #define HAVE_AIC3X //#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8 /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_CONNECT /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 20 #define DEFAULT_BRIGHTNESS_SETTING 16 /* OF default brightness (80%) */ #define DEFAULT_DIMNESS_SETTING 6 /* OF default inactive (30%) */ /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF #ifndef BOOTLOADER #define HAVE_WIFI /* define this if the target has Marvell 88W8686 interfaced over SPI */ #define HAVE_W8686_SPI #endif /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x200000 #define BATTERY_CAPACITY_DEFAULT 800 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 100 /* capacity increment */ /* bq27000 provides voltage, percentage and time measure. * Voltage reading is available every 2.56 seconds and does not need filtering. * Read the measured voltage every 3 seconds so we are guaranteed to not read * the same value twice (do not try to read every 2.56 seconds as clocks are * not synchronized). */ #define CONFIG_BATTERY_MEASURE (VOLTAGE_MEASURE|PERCENTAGE_MEASURE|TIME_MEASURE) #define BATT_AVE_SAMPLES 1 #define POWER_THREAD_STEP_TICKS (3*HZ) /* define current usage levels */ #if 0 /* TODO */ #define CURRENT_NORMAL 85 #define CURRENT_BACKLIGHT 200 #endif #define CONFIG_CPU DM320 #define CONFIG_I2C I2C_DM320 #define HAVE_SOFTWARE_I2C /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 150000000 /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* Hardware controlled charging */ #define CONFIG_CHARGING CHARGING_MONITOR #define CONFIG_USBOTG USBOTG_TNETV105 #define HAVE_USBSTACK #define HAVE_USB_POWER #define HAVE_USB_CHARGING_ENABLE #define HAVE_BOOTLOADER_USB_MODE #define USB_VENDOR_ID 0x0781 #define USB_PRODUCT_ID 0x7480 #define USB_NUM_ENDPOINTS 5 #define INCLUDE_TIMEOUT_API /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "sansa" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY