/* Pull in SoC-specific defines */ #include "imx233-config.h" /* * This config file is for the Sandisk Sansa Fuze+ */ #define IMX233_SUBTARGET 3780 #define IMX233_PACKAGE IMX233_BGA169 #define IMX233_PARTITIONS IMX233_FREESCALE /* For Rolo and boot loader */ #define MODEL_NUMBER 72 #define MODEL_NAME "Sandisk Sansa Fuze+" /* Define if boot data from bootloader has been enabled for the target */ #define HAVE_BOOTDATA /* define boot redirect file name allows booting from external drives */ #define BOOT_REDIR "rockbox_main.fuze+" #define MULTIBOOT_MIN_VOLUME 1 // HW can do it but we don't have the IRAM for mix buffers //#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192 #define HW_SAMPR_CAPS SAMPR_CAP_ALL_96 /* define this if you have recording possibility */ #define HAVE_RECORDING #define REC_SAMPR_CAPS SAMPR_CAP_ALL_96 /* Default recording levels */ #define DEFAULT_REC_MIC_GAIN 23 #define DEFAULT_REC_LEFT_GAIN 23 #define DEFAULT_REC_RIGHT_GAIN 23 /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR #define HAVE_LCD_FLIP #define HAVE_LCD_INVERT #ifndef BOOTLOADER #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* define this if you have LCD enable function */ #define HAVE_LCD_ENABLE /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_IMX233 /* define this if you have a real-time clock with alarm facilities */ #define HAVE_RTC_ALARM #endif /* !BOOTLOADER */ /* define this if you have an i.MX23 codec */ #define HAVE_IMX233_CODEC #define CONFIG_TUNER SI4700 #define HAVE_RDS_CAP /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS #define CONFIG_KEYPAD SANSA_FUZEPLUS_PAD #define HAVE_TOUCHPAD #define HAVE_TOUCHPAD_SENSITIVITY_SETTING #define MIN_TOUCHPAD_SENSITIVITY_SETTING -25 #define MAX_TOUCHPAD_SENSITIVITY_SETTING 25 #define DEFAULT_TOUCHPAD_SENSITIVITY_SETTING 13 /* Define this to enable dead zone on touchpad */ #ifndef SIMULATOR #define HAVE_TOUCHPAD_DEADZONE #define DEFAULT_TOUCHPAD_DEADZONE_SETTING 30 #define MIN_TOUCHPAD_DEADSPACE_SETTING 0 #define MAX_TOUCHPAD_DEADSPACE_SETTING 100 #endif /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* LCD dimensions */ #define LCD_WIDTH 240 #define LCD_HEIGHT 320 /* sqrt(240^2 + 320^2) / 2.4 = 166.7 */ #define LCD_DPI 167 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Some Sansa Fuzes seem to be FAT16 formatted */ #define HAVE_FAT16SUPPORT /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 //#define AB_REPEAT_ENABLE /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 0 #define MAX_BRIGHTNESS_SETTING 32 #define DEFAULT_BRIGHTNESS_SETTING 16 /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE (STORAGE_SD | STORAGE_MMC) #define NUM_DRIVES 2 #define HAVE_HOTSWAP /* Extra threads: touchpad and rds */ #define TARGET_EXTRA_THREADS 2 /* todo */ #define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_TARGET /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have an IMX233*/ #define CONFIG_CPU IMX233 /* Define this if you want to use the IMX233 i2c interface */ #define CONFIG_I2C I2C_IMX233 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* define current usage levels (based on battery bench) */ #define CURRENT_NORMAL 35 #define CURRENT_BACKLIGHT 30 #define CURRENT_RECORD CURRENT_NORMAL /* maximum charging current */ #define CURRENT_MAX_CHG 200 /* Define this to the CPU frequency */ #define CPU_FREQ 454000000 /* Type of LCD */ #define CONFIG_LCD LCD_FUZEPLUS /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USB_EXTRA_STACK 0x80 //#define USB_HANDLED_BY_OF #define USB_VENDOR_ID 0x0781 #define USB_PRODUCT_ID 0x74e1 #define HAVE_USB_HID_MOUSE #define HAVE_BOOTLOADER_USB_MODE /* The fuze+ actually interesting partition table does not use 512-byte sector * (usually 2048 logical sector size) */ #define MAX_VIRT_SECTOR_SIZE 2048 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ /* Virtual LED (icon) */ #define CONFIG_LED LED_VIRTUAL /* Define this on iMX233 if the boot process uses a dualboot stub */ #define HAVE_DUALBOOT_STUB #define BOOTFILE_EXT "sansa" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define INCLUDE_TIMEOUT_API