/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 *
 * Copyright (C) 2011 by Amaury Pouly
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include "config.h"
#include "cpu.h"

#if defined(HAVE_BOOTDATA) && !defined(BOOTLOADER)
#include "bootdata.h"
#endif

.section .vectors,"ax",%progbits
.code 32
    /* most handlers are in DRAM which is too far away for a relative jump */
    ldr     pc, =start
    ldr     pc, =undef_instr_handler
    ldr     pc, =software_int_handler
    ldr     pc, =prefetch_abort_handler
    ldr     pc, =data_abort_handler
    ldr     pc, =reserved_handler
    ldr     pc, =irq_handler
    ldr     pc, =fiq_handler

/* When starting, we will be running at 0x40000000 most probably
 * but the code is expected to be loaded at 0x4xxxxxxx (uncached) and to be
 * running at virtual address 0xyyyyyyyy (cached). So we first
 * need to move everything to the right locationn then we setup the mmu and
 * jump to the final virtual address. */
.text
.global start
    /** The code below must be able to run at any address **/
start:
    /* Copy running address */
    sub     r7, pc, #8
    /* Save r0 */
    mov     r6, r0

    /* enter supervisor mode, disable IRQ/FIQ */
    msr     cpsr_c, #0xd3
    /* Disable MMU, disable caching and buffering;
     * use low exception range address (the core uses high range by default) */
    mrc     p15, 0, r0, c1, c0, 0
    ldr     r1, =0x3005
    bic     r0, r1
    mcr     p15, 0, r0, c1, c0, 0

    /* To call the C code we need a stack, since the loader's stack might be
     * in virtual memory, we need a physical address for the stack. Furthermore,
     * we cannot use the main firmware stack yet because it overlaps with the
     * init code which will be moved later. We rely on the linker to provide
     * a safe, temporary stack */
    ldr     sp, =crt0_tmpstack_phys

    /* Enable MMU */
    bl      memory_init

    /* Copy the DRAM
     * Assume the dram binary blob is located at the loading address (r5) */
    mov    r2, r7
    ldr    r3, =_dramcopystart
    ldr    r4, =_dramcopyend
1:
    cmp     r4, r3
    ldrhi   r5, [r2], #4
    strhi   r5, [r3], #4
    bhi     1b

    mov     r2, #0
    mcr     p15, 0, r2, c7, c5, 0   @ Invalidate ICache
    
    /* Jump to real location */
    ldr     pc, =remap
remap:
    /** The code below is be running at the right virtual address **/
    /* Zero out IBSS */
    ldr     r2, =_iedata
    ldr     r3, =_iend
    mov     r4, #0
1:
    cmp     r3, r2
    strhi   r4, [r2], #4
    bhi     1b

    /* Copy the IRAM */
    /* must be done before bss is zeroed */
    ldr     r2, =_iramcopy
    ldr     r3, =_iramstart
    ldr     r4, =_iramend
1:
    cmp     r4, r3
    ldrhi   r5, [r2], #4
    strhi   r5, [r3], #4
    bhi     1b

#ifdef HAVE_INIT_ATTR
    /* copy init data to codec buffer */
    /* must be done before bss is zeroed */
    ldr    r2, =_initcopy
    ldr    r3, =_initstart
    ldr    r4, =_initend
1:
    cmp     r4, r3
    ldrhi   r5, [r2], #4
    strhi   r5, [r3], #4
    bhi     1b

    mov     r2, #0
    mcr     p15, 0, r2, c7, c5, 0   @ Invalidate ICache
#endif

    /* Initialise bss section to zero */
    ldr     r2, =_edata
    ldr     r3, =_end
    mov     r4, #0
1:
    cmp     r3, r2
    strhi   r4, [r2], #4
    bhi     1b

    /* Set up stack for IRQ mode */ 
    msr     cpsr_c, #0xd2
    ldr     sp, =irq_stack

    /* Set up stack for FIQ mode */ 
    msr     cpsr_c, #0xd1
    ldr     sp, =irq_stack

    /* Let abort and undefined modes use irq stack, svc uses its own stack
     * for interrupt processing */
    msr     cpsr_c, #0xd3
    ldr     sp, =svc_stack
    msr     cpsr_c, #0xd7
    ldr     sp, =irq_stack
    msr     cpsr_c, #0xdb
    ldr     sp, =irq_stack

    /* Switch to sys mode */
    msr     cpsr_c, #0xdf

    /* Set up some stack and munge it with 0xdeadbeef */
    ldr     sp, =stackend
    ldr     r2, =stackbegin
    ldr     r3, =0xdeadbeef
1:
    cmp     sp, r2
    strhi   r3, [r2], #4
    bhi     1b

    /* Jump to main */
    mov     r0, r6
    mov     r1, r7
    bl      main
1:
    b       1b

#if defined(HAVE_BOOTDATA) && !defined(BOOTLOADER)
/* boot data structure */
put_boot_data_here
#endif

/* Cache-align interrupt stacks */
    .balign    32
/* 256 words of IRQ stack */
    .space 256*4
irq_stack:

/* 256 words of FIQ stack */
    .space 256*4
svc_stack:
end: