/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 *
 * Copyright (C) 2002 by Alan Korr & Nick Robinson
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include "button.h"
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "kernel.h"
#include "lcd.h"
#include "serial.h"
#include "iap.h"

#if defined(IPOD_ACCESSORY_PROTOCOL)
struct ppuart {
    volatile unsigned long *RBR_THR_DLL;
    volatile unsigned long *LCR;
    volatile unsigned long *LSR;
    int autobaud;
};

static struct ppuart SER0 = { &SER0_RBR, &SER0_LCR, &SER0_LSR, 0 };
#if defined(IPOD_COLOR) || defined(IPOD_4G) || defined(IPOD_MINI) || defined(IPOD_MINI2G)
static struct ppuart SER1 = { &SER1_RBR, &SER1_LCR, &SER1_LSR, 0 };
static volatile struct ppuart *SERn = &SER1; // ie dock connector
#else
static volatile struct ppuart *SERn = &SER0;
#endif

static void set_bitrate(volatile struct ppuart *port, unsigned int rate)
{
    unsigned int divisor;

    divisor = 24000000L / rate / 16;
    *port->LCR = 0x80; /* Divisor latch enable */
    *port->RBR_THR_DLL = (divisor >> 0) & 0xFF;
    *port->LCR = 0x03; /* Divisor latch disable, 8-N-1 */
}

void serial_setup (void)
{
    int tmp;

#if defined(IPOD_NANO) || defined(IPOD_VIDEO)
    /* Route the Tx/Rx pins. 5G Ipods. ser0, dock conncetor */
    (*(volatile unsigned long *)(0x7000008C)) &= ~0x0C;
    GPO32_ENABLE &= ~0x0C;

    DEV_EN = DEV_EN | DEV_SER0;
    CPU_HI_INT_DIS = SER0_MASK;

    DEV_RS |= DEV_SER0;
    sleep(1);
    DEV_RS &= ~DEV_SER0;

    SER0_LCR = 0x80; /* Divisor latch enable */
    SER0_DLM = 0x00;
    SER0_LCR = 0x03; /* Divisor latch disable, 8-N-1 */
    SER0_IER = 0x01;

    SER0_FCR = 0x07; /* Tx+Rx FIFO reset and FIFO enable */

    CPU_INT_EN = HI_MASK;
    CPU_HI_INT_EN = SER0_MASK;
    tmp = SER0_RBR;

    SER0.autobaud = 2;
    set_bitrate(&SER0, 115200);

#elif defined(IPOD_COLOR) || defined(IPOD_4G) || defined(IPOD_MINI) || defined(IPOD_MINI2G)

    /* Route the Tx/Rx pins. 4G Ipods, MINI & MINI2G. ser1, dock connector */
    GPIO_CLEAR_BITWISE(GPIOD_ENABLE, 0x6);
    GPIO_CLEAR_BITWISE(GPIOD_OUTPUT_EN, 0x6);
    GPIOD_INT_CLR = 0x6;

    outl(0x70000018, inl(0x70000018) & ~0xc00);

    DEV_EN |= DEV_SER1;
    CPU_HI_INT_DIS = SER1_MASK;

    DEV_RS |= DEV_SER1;
    sleep(1);
    DEV_RS &= ~DEV_SER1;

    SER1_LCR = 0x80; /* Divisor latch enable */
    SER1_DLM = 0x00;
    SER1_LCR = 0x03; /* Divisor latch disable, 8-N-1 */
    SER1_IER = 0x01;

    SER1_FCR = 0x07; /* Tx+Rx FIFO reset and FIFO enable */

    CPU_INT_EN = HI_MASK;
    CPU_HI_INT_EN = SER1_MASK;
    tmp = SER1_RBR;

    /* Route the Tx/Rx pins.  4G Ipod, ser0, top connector */
    GPIO_CLEAR_BITWISE(GPIOC_INT_EN, 0x8);
    GPIO_CLEAR_BITWISE(GPIOC_INT_LEV, 0x8);
    GPIOC_INT_CLR = 0x8;

    DEV_EN |= DEV_SER0;
    CPU_HI_INT_DIS = SER0_MASK;

    DEV_RS |= DEV_SER0;
    sleep(1);
    DEV_RS &= ~DEV_SER0;

    SER0_LCR = 0x80; /* Divisor latch enable */
    SER0_DLM = 0x00;
    SER0_LCR = 0x03; /* Divisor latch disable, 8-N-1 */
    SER0_IER = 0x01;

    SER0_FCR = 0x07; /* Tx+Rx FIFO reset and FIFO enable */

    CPU_INT_EN = HI_MASK;
    CPU_HI_INT_EN = SER0_MASK;
    tmp = SER0_RBR;

    SER1.autobaud = 2;
    set_bitrate(&SER1, 115200);
    SER0.autobaud = 2;
    set_bitrate(&SER0, 115200);

#endif

    (void)tmp;

}

void serial_bitrate(int rate)
{
    if(rate == 0)
    {
        SER0.autobaud = 2;
        set_bitrate(&SER0, 115200);
#if defined(IPOD_COLOR) || defined(IPOD_4G) || defined(IPOD_MINI) || defined(IPOD_MINI2G)
        SER1.autobaud = 2;
        set_bitrate(&SER1, 115200);
#endif
    }
    else
    {
        SER0.autobaud = 0;
        set_bitrate(&SER0, rate);
#if defined(IPOD_COLOR) || defined(IPOD_4G) || defined(IPOD_MINI) || defined(IPOD_MINI2G)
        SER1.autobaud = 0;
        set_bitrate(&SER1, rate);
#endif
    }
}

int tx_rdy(void)
{
    if((*SERn->LSR & 0x20))
        return 1;
    else
        return 0;
}

void tx_writec(unsigned char c)
{
    *SERn->RBR_THR_DLL = (int)c;
}

void SERIAL_ISR(int port)
{
    static int badbaud = 0;
    static bool newpkt = true;
    char temp;

#ifdef HAVE_IAP_MULTIPORT
    if (port && SERn != &SER1)
        SERn = &SER1;
    else if (!port && SERn != &SER0)
        SERn = &SER0;
    port = !port;  /* UART0 is headphone, ie IAP1 */
#else
    (void)port;
#endif

    while((*SERn->LSR & 0x1))
    {
        temp = (*SERn->RBR_THR_DLL & 0xFF);
        if (newpkt && SERn->autobaud > 0)
        {
            if (SERn->autobaud == 1)
            {
                switch (temp)
                {
                    case 0xFF:
                    case 0x55:
                        break;
                    case 0xFC:
                        set_bitrate(SERn, 19200);
                        temp = 0xFF;
                        break;
                    case 0xE0:
                        set_bitrate(SERn, 9600);
                        temp = 0xFF;
                        break;
                    default:
                        badbaud++;
                        if (badbaud >= 6) /* Switch baud detection mode */
                        {
                            SERn->autobaud = 2;
                            set_bitrate(SERn, 115200);
                            badbaud = 0;
                        } else {
                            set_bitrate(SERn, 57600);
                        }
                        continue;
                }
            } else {
                switch (temp)
                {
                    case 0xFF:
                    case 0x55:
                        break;
                    case 0xFE:
                        set_bitrate(SERn, 57600);
                        temp = 0xFF;
                        break;
                    case 0xFC:
                        set_bitrate(SERn, 38400);
                        temp = 0xFF;
                        break;
                    case 0xE0:
                        set_bitrate(SERn, 19200);
                        temp = 0xFF;
                        break;
                    default:
                        badbaud++;
                        if (badbaud >= 6) /* Switch baud detection */
                        {
                            SERn->autobaud = 1;
                            set_bitrate(SERn, 57600);
                            badbaud = 0;
                        } else {
                            set_bitrate(SERn, 115200);
                        }
                        continue;
                }
            }
        }
        bool pkt = iap_getc(IF_IAP_MP(port,) temp);
        if(newpkt && !pkt)
            SERn->autobaud = 0; /* Found good baud */
        newpkt = pkt;
    }
}
#endif