/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * Copyright © 2008 Rafaël Carré * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include "config.h" #include "system.h" #include "kernel.h" #include "button.h" #include "lcd.h" #include "font.h" #include "storage.h" #ifdef IPOD_NANO2G #include "power.h" #include "pmu-target.h" #include "nand-target.h" #endif #ifdef HAVE_SERIAL #include "uart-target.h" #include "uc87xx.h" #endif #define DEBUG_CANCEL BUTTON_MENU /* Skeleton for adding target specific debug info to the debug menu */ #define _DEBUG_PRINTF(a, varargs...) lcd_putsf(0, line++, (a), ##varargs); extern int lcd_type; extern uint32_t nand_type[4]; bool dbg_hw_info(void) { int line; int i; #ifdef IPOD_NANO2G unsigned int state = 0; #ifdef UC87XX_DEBUG const unsigned int max_states=3; #else const unsigned int max_states=2; #endif int nand_bank_count; struct storage_info info; const struct nand_device_info_type *nand_devicetype[4]; nand_get_info(&info); nand_bank_count = 0; for(i=0;i<4;i++) { nand_devicetype[i] = nand_get_device_type(i); if(nand_devicetype[i] != NULL) nand_bank_count++; } #endif lcd_clear_display(); lcd_setfont(FONT_SYSFIXED); state=0; while(1) { lcd_clear_display(); line = 0; /* _DEBUG_PRINTF statements can be added here to show debug info */ #ifdef IPOD_NANO2G if(state == 0) { _DEBUG_PRINTF("CPU:"); _DEBUG_PRINTF("current_tick: %d", (unsigned int)current_tick); line++; _DEBUG_PRINTF("LCD:"); _DEBUG_PRINTF("type: %d, %s", lcd_type, lcd_type ? "(7) LDS176" : "(2) ILI9320"); line++; _DEBUG_PRINTF("NAND:"); _DEBUG_PRINTF("banks: %d",nand_bank_count); for(i=0;i<4;i++) { if(nand_devicetype[i] != NULL) { _DEBUG_PRINTF("bank: %d, id: %08X", i, (unsigned int)(*nand_devicetype[i]).id); } } _DEBUG_PRINTF("sectors: %d", info.num_sectors); _DEBUG_PRINTF("sector size: %d", info.sector_size); _DEBUG_PRINTF("last disk activity: %d", (unsigned int)nand_last_disk_activity()); } else if(state==1) { _DEBUG_PRINTF("PMU:"); for(i=0;i<7;i++) { static const char * const device[] = {"(unknown)", "(CLICKWHEEL)", "(LCD)", "(AUDIO)", "(NAND)", "(unknown)", "(ACCESSORY)"}; _DEBUG_PRINTF("ldo%d %s: %dmV %s",i, pmu_read(0x2e + (i << 1))?" on":"off", 900 + pmu_read(0x2d + (i << 1))*100, device[i]); } _DEBUG_PRINTF("cpu voltage: %dmV",625 + pmu_read(0x1e)*25); _DEBUG_PRINTF("memory voltage: %dmV",625 + pmu_read(0x22)*25); line++; _DEBUG_PRINTF("charging: %s", charging_state() ? "true" : "false"); _DEBUG_PRINTF("backlight: %s", pmu_read(0x29) ? "on" : "off"); _DEBUG_PRINTF("brightness value: %d", pmu_read(0x28)); } #ifdef UC87XX_DEBUG else if(state==2) { extern struct uartc_port ser_port; int tx_stat, rx_stat, tx_speed, rx_speed; char line_cfg[4]; int abr_stat; uint32_t abr_cnt; static const char * const abrstatus[] = {"Idle", "Launched", "Counting", "Abnormal"}; uartc_port_get_line_info(&ser_port, &tx_stat, &rx_stat, &tx_speed, &rx_speed, line_cfg); abr_stat = uartc_port_get_abr_info(&ser_port, &abr_cnt); _DEBUG_PRINTF("UART %d:", ser_port.id); line++; _DEBUG_PRINTF("line: %s", line_cfg); _DEBUG_PRINTF("Tx: %s, speed: %d", tx_stat ? "On":"Off", tx_speed); _DEBUG_PRINTF("Rx: %s, speed: %d", rx_stat ? "On":"Off", rx_speed); _DEBUG_PRINTF("ABR: %s, cnt: %u", abrstatus[abr_stat], abr_cnt); line++; _DEBUG_PRINTF("n_tx_bytes: %u", ser_port.n_tx_bytes); _DEBUG_PRINTF("n_rx_bytes: %u", ser_port.n_rx_bytes); _DEBUG_PRINTF("n_ovr_err: %u", ser_port.n_ovr_err); _DEBUG_PRINTF("n_parity_err: %u", ser_port.n_parity_err); _DEBUG_PRINTF("n_frame_err: %u", ser_port.n_frame_err); _DEBUG_PRINTF("n_break_detect: %u", ser_port.n_break_detect); _DEBUG_PRINTF("ABR n_abnormal: %u %u", ser_port.n_abnormal0, ser_port.n_abnormal1); } #endif else { state=0; } #else _DEBUG_PRINTF("dbg_hw_info"); #endif lcd_update(); switch(button_get_w_tmo(HZ/20)) { case BUTTON_SCROLL_BACK: if(state!=0) state--; break; case BUTTON_SCROLL_FWD: if(state!=max_states-1) { state++; } break; case DEBUG_CANCEL: case BUTTON_REL: lcd_setfont(FONT_UI); return false; } } lcd_setfont(FONT_UI); return false; } bool dbg_ports(void) { int line; lcd_setfont(FONT_SYSFIXED); while(1) { lcd_clear_display(); line = 0; _DEBUG_PRINTF("GPIO 0: %08x",(unsigned int)PDAT0); _DEBUG_PRINTF("GPIO 1: %08x",(unsigned int)PDAT1); _DEBUG_PRINTF("GPIO 2: %08x",(unsigned int)PDAT2); _DEBUG_PRINTF("GPIO 3: %08x",(unsigned int)PDAT3); _DEBUG_PRINTF("GPIO 4: %08x",(unsigned int)PDAT4); _DEBUG_PRINTF("GPIO 5: %08x",(unsigned int)PDAT5); _DEBUG_PRINTF("GPIO 6: %08x",(unsigned int)PDAT6); _DEBUG_PRINTF("GPIO 7: %08x",(unsigned int)PDAT7); _DEBUG_PRINTF("GPIO 10: %08x",(unsigned int)PDAT10); _DEBUG_PRINTF("GPIO 11: %08x",(unsigned int)PDAT11); _DEBUG_PRINTF("GPIO 13: %08x",(unsigned int)PDAT13); _DEBUG_PRINTF("GPIO 14: %08x",(unsigned int)PDAT14); _DEBUG_PRINTF("5USEC : %08x",(unsigned int)FIVE_USEC_TIMER); _DEBUG_PRINTF("USEC : %08x",(unsigned int)USEC_TIMER); _DEBUG_PRINTF("USECREG: %08x",(unsigned int)(*(REG32_PTR_T)(0x3C700084))); lcd_update(); if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL)) break; } lcd_setfont(FONT_UI); return false; }