/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * * Copyright (C) 2011 by Tomasz Moń * Copyright (C) 2007, 2009 by Karl Kurbjun * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #include "system.h" #include "kernel.h" #include "string.h" #include #include "button.h" #include "lcd.h" #include "debug.h" #include "font.h" #include "lcd-target.h" #if defined(MROBE_500) #include "tsc2100.h" #include "m66591.h" #endif /* define only if you know what you are doing */ #undef DEBUG_GIO #ifdef DEBUG_GIO #ifdef SANSA_CONNECT #define DEBUG_GIO_SET BUTTON_UP #define DEBUG_GIO_SET_TXT "UP" #define DEBUG_GIO_CLR BUTTON_DOWN #define DEBUG_GIO_CLR_TXT "DOWN" #define DEBUG_GIO_TOGGLE BUTTON_SELECT #define DEBUG_GIO_TOGGLE_TXT "SELECT" #define DEBUG_GIO_NEXT BUTTON_SCROLL_FWD #define DEBUG_GIO_PREV BUTTON_SCROLL_BACK #else #warning "No keymap defined for target" #endif static void gio_set(int gio) { if (gio < 0) return; if (gio <= 15) IO_GIO_BITSET0 = (1 << gio); else if (gio <= 31) IO_GIO_BITSET1 = (1 << (gio-16)); else if (gio <= 40) IO_GIO_BITSET2 = (1 << (gio-32)); } static void gio_clear(int gio) { if (gio < 0) return; if (gio <= 15) IO_GIO_BITCLR0 = (1 << gio); else if (gio <= 31) IO_GIO_BITCLR1 = (1 << (gio-16)); else if (gio <= 40) IO_GIO_BITCLR2 = (1 << (gio-32)); } static void gio_toggle_direction(int gio) { if (gio < 0) return; if (gio <= 15) IO_GIO_DIR0 ^= (1 << gio); else if (gio <= 31) IO_GIO_DIR1 ^= (1 << (gio-16)); else if (gio <= 40) IO_GIO_DIR2 ^= (1 << (gio-32)); } static bool gio_is_inverted(int gio) { unsigned short reg; int bit; if (gio <= 15) reg = IO_GIO_INV0, bit = (1 << gio); else if (gio <= 31) reg = IO_GIO_INV1, bit = (1 << (gio-16)); else if (gio <= 40) reg = IO_GIO_INV2, bit = (1 << (gio-32)); return reg & bit; } static bool gio_is_output(int gio) { unsigned short reg; int bit; if (gio <= 15) reg = IO_GIO_DIR0, bit = (1 << gio); else if (gio <= 31) reg = IO_GIO_DIR1, bit = (1 << (gio-16)); else if (gio <= 40) reg = IO_GIO_DIR2, bit = (1 << (gio-32)); return !(reg & bit); } static bool gio_get_state(int gio) { unsigned short reg; int bit; if (gio <= 15) reg = IO_GIO_BITSET0, bit = (1 << gio); else if (gio <= 31) reg = IO_GIO_BITSET1, bit = (1 << (gio-16)); else if (gio <= 40) reg = IO_GIO_BITSET2, bit = (1 << (gio-32)); return reg & bit; } #endif bool dbg_ports(void) { int line = 0; int i; int button; bool done=false; #ifdef DEBUG_GIO int gio = 0; #endif (void)i; lcd_setfont(FONT_SYSFIXED); lcd_clear_display(); while(!done) { line = 0; button = button_get_w_tmo(1); if (button == BUTTON_POWER) done=true; #if defined(MROBE_500) lcd_puts(0, line++, "[USB Information]"); lcd_putsf(0, line++, "TRN_CTRL: 0x%04x TRN_LNSTAT: 0x%04x", M66591_TRN_CTRL, M66591_TRN_LNSTAT); lcd_putsf(0, line++, "HSFS: 0x%04x TESTMODE: 0x%04x", M66591_HSFS, M66591_TESTMODE); lcd_putsf(0, line++, "PIN_CFG0: 0x%04x PIN_CFG1: 0x%04x", M66591_PIN_CFG0, M66591_PIN_CFG1); lcd_putsf(0, line++, "PIN_CFG2: 0x%04x", M66591_PIN_CFG2); lcd_putsf(0, line++, "DCP_CTRLEN: 0x%04x", M66591_DCP_CTRLEN); lcd_putsf(0, line++, "CPORT_CTRL0: 0x%04x CPORT_CTRL1: 0x%04x", M66591_CPORT_CTRL0, M66591_CPORT_CTRL1); lcd_putsf(0, line++, "CPORT_CTRL2: 0x%04x DPORT_CTRL0: 0x%04x", M66591_CPORT_CTRL2, M66591_DPORT_CTRL0); lcd_putsf(0, line++, "DPORT_CTRL1: 0x%04x DPORT_CTRL2: 0x%04x", M66591_DPORT_CTRL1, M66591_DPORT_CTRL2); lcd_putsf(0, line++, "INTCFG_MAIN: 0x%04x INTCFG_OUT: 0x%04x", M66591_INTCFG_MAIN, M66591_INTCFG_OUT); lcd_putsf(0, line++, "INTCFG_RDY: 0x%04x INTCFG_NRDY: 0x%04x", M66591_INTCFG_RDY, M66591_INTCFG_NRDY); lcd_putsf(0, line++, "INTCFG_EMP: 0x%04x INTSTAT_MAIN: 0x%04x", M66591_INTCFG_EMP, M66591_INTSTAT_MAIN); lcd_putsf(0, line++, "INTSTAT_RDY: 0x%04x INTSTAT_NRDY: 0x%04x", M66591_INTSTAT_RDY, M66591_INTSTAT_NRDY); lcd_putsf(0, line++, "INTSTAT_EMP: 0x%04x USB_ADDRESS: 0x%04x", M66591_INTSTAT_EMP, M66591_USB_ADDRESS); lcd_putsf(0, line++, "USB_REQ0: 0x%04x USB_REQ1: 0x%04x", M66591_USB_REQ0, M66591_USB_REQ1); lcd_putsf(0, line++, "USB_REQ2: 0x%04x USB_REQ3: 0x%04x", M66591_USB_REQ2, M66591_USB_REQ3); lcd_putsf(0, line++, "DCP_CNTMD: 0x%04x DCP_MXPKSZ: 0x%04x", M66591_DCP_CNTMD, M66591_DCP_MXPKSZ); lcd_putsf(0, line++, "DCPCTRL: 0x%04x", M66591_DCPCTRL); line++; for(i=1; i<6; i++) { M66591_PIPE_CFGWND=i; lcd_putsf(0, line++, "PIPE_CFGSEL:0x%04x PIPE_CFGWND: 0x%04x", M66591_PIPE_CFGSEL, M66591_PIPE_CFGWND); } line++; lcd_putsf(0, line++, "PIPECTRL1: 0x%04x PIPECTRL2: 0x%04x", M66591_PIPECTRL1, M66591_PIPECTRL2); lcd_putsf(0, line++, "PIPECTRL3: 0x%04x PIPECTRL4: 0x%04x", M66591_PIPECTRL3, M66591_PIPECTRL4); lcd_putsf(0, line++, "PIPECTRL5: 0x%04x PIPECTRL6: 0x%04x", M66591_PIPECTRL5, M66591_PIPECTRL6); lcd_putsf(0, line++, "GIO_BITSET0: 0x%04x GIO_BITSET1: 0x%04x", IO_GIO_BITSET0, IO_GIO_BITSET1); lcd_putsf(0, line++, "GIO_BITSET2: 0x%04x", IO_GIO_BITSET2); lcd_putsf(0, line++, "SDRAM_SDMODE: 0x%04x SDRAM_REFCTL: 0x%04x", IO_SDRAM_SDMODE, IO_SDRAM_REFCTL); lcd_putsf(0, line++, "EMIF_CS4CTRL1:0x%04x EMIF_CS4CTRL2:0x%04x", IO_EMIF_CS4CTRL1, IO_EMIF_CS4CTRL2); #elif !defined(DEBUG_GIO) lcd_putsf(0, line++, "/* GIO0 - GIO15 */"); lcd_putsf(0, line++, "GIO_DIR0: 0x%04X", IO_GIO_DIR0); lcd_putsf(0, line++, "GIO_INV0: 0x%04X", IO_GIO_INV0); lcd_putsf(0, line++, "GIO_BITSET0: 0x%04X", IO_GIO_BITSET0); lcd_putsf(0, line++, "/* GIO16 - GIO31 */"); lcd_putsf(0, line++, "GIO_DIR1: 0x%04X", IO_GIO_DIR1); lcd_putsf(0, line++, "GIO_INV1: 0x%04X", IO_GIO_INV1); lcd_putsf(0, line++, "GIO_BITSET1: 0x%04X", IO_GIO_BITSET1); lcd_putsf(0, line++, "/* GIO32 - GIO40 */"); lcd_putsf(0, line++, "GIO_DIR2: 0x%04X", IO_GIO_DIR2); lcd_putsf(0, line++, "GIO_INV2: 0x%04X", IO_GIO_INV2); lcd_putsf(0, line++, "GIO_BITSET2: 0x%04X", IO_GIO_BITSET2); #endif #ifdef DEBUG_GIO if ((button == DEBUG_GIO_NEXT) && (gio < 40)) gio++; else if ((button == DEBUG_GIO_PREV) && (gio > 0)) gio--; else if (button == DEBUG_GIO_SET) gio_set(gio); else if (button == DEBUG_GIO_CLR) gio_clear(gio); else if (button == DEBUG_GIO_TOGGL #if 0 /* * this makes current consumption pretty constant * at cost of screen updates */ else continue; #endif line++; lcd_putsf(0, line++, "< GIO%d >", gio); lcd_putsf(0, line++, "GIO%d is %d (%s, %s)", gio, gio_get_state(gio) ? 1 : 0, gio_is_inverted(gio) ? "inverted" : "normal", gio_is_output(gio) ? "output" : "input"); lcd_putsf(0, line++, "%s - Set bit (using INV)", DEBUG_GIO_SET_TXT); lcd_putsf(0, line++, "%s - Clear bit (using INV)", DEBUG_GIO_CLR_TXT); lcd_putsf(0, line++, "%s - toggle direction",DEBUG_GIO_TOGGLE_TXT); #endif lcd_update(); } return false; } bool dbg_hw_info(void) { int line = 0, oldline; int button; #if defined(MROBE_500) int *address=0x0; #endif bool done=false; lcd_setfont(FONT_SYSFIXED); lcd_clear_display(); /* Put all the static text befor the while loop */ lcd_puts(0, line++, "[Hardware info]"); lcd_puts(0, line++, "Clock info:"); #if LCD_WIDTH > 320 lcd_putsf(0, line++, "IO_CLK_PLLA: 0x%04x IO_CLK_PLLB: 0x%04x " "IO_CLK_SEL0: 0x%04x IO_CLK_SEL1: 0x%04x", IO_CLK_PLLA, IO_CLK_PLLB, IO_CLK_SEL0, IO_CLK_SEL1); lcd_putsf(0, line++, "IO_CLK_SEL2: 0x%04x IO_CLK_DIV0: 0x%04x " "IO_CLK_DIV1: 0x%04x IO_CLK_DIV2: 0x%04x", IO_CLK_SEL2, IO_CLK_DIV0, IO_CLK_DIV1, IO_CLK_DIV2); lcd_putsf(0, line++, "IO_CLK_DIV3: 0x%04x IO_CLK_DIV4: 0x%04x " "IO_CLK_BYP : 0x%04x IO_CLK_INV : 0x%04x", IO_CLK_DIV3, IO_CLK_DIV4, IO_CLK_BYP, IO_CLK_INV); lcd_putsf(0, line++, "IO_CLK_MOD0: 0x%04x IO_CLK_MOD1: 0x%04x " "IO_CLK_MOD2: 0x%04x IO_CLK_LPCTL0: 0x%04x", IO_CLK_MOD0, IO_CLK_MOD1, IO_CLK_MOD2, IO_CLK_LPCTL0); #else lcd_putsf(0, line++, " IO_CLK_PLLA: 0x%04x IO_CLK_PLLB: 0x%04x", IO_CLK_PLLA, IO_CLK_PLLB); lcd_putsf(0, line++, " IO_CLK_SEL0: 0x%04x IO_CLK_SEL1: 0x%04x", IO_CLK_SEL0, IO_CLK_SEL1); lcd_putsf(0, line++, " IO_CLK_SEL2: 0x%04x IO_CLK_DIV0: 0x%04x", IO_CLK_SEL2, IO_CLK_DIV0); lcd_putsf(0, line++, " IO_CLK_DIV1: 0x%04x IO_CLK_DIV2: 0x%04x", IO_CLK_DIV1, IO_CLK_DIV2); lcd_putsf(0, line++, " IO_CLK_DIV3: 0x%04x IO_CLK_DIV4: 0x%04x", IO_CLK_DIV3, IO_CLK_DIV4); lcd_putsf(0, line++, " IO_CLK_BYP : 0x%04x IO_CLK_INV : 0x%04x", IO_CLK_BYP, IO_CLK_INV); lcd_putsf(0, line++, " IO_CLK_MOD0: 0x%04x IO_CLK_MOD1: 0x%04x ", IO_CLK_MOD0, IO_CLK_MOD1); lcd_putsf(0, line++, " IO_CLK_MOD2: 0x%04x IO_CLK_LPCTL0: 0x%04x ", IO_CLK_MOD2, IO_CLK_LPCTL0); #endif lcd_puts(0, line++, "Interrupt info:"); lcd_putsf(0, line++, " IO_INTC_EINT0: 0x%04x IO_INTC_EINT1: 0x%04x ", IO_INTC_EINT0, IO_INTC_EINT1); lcd_putsf(0, line++, " IO_INTC_EINT2: 0x%04x IO_INTC_IRQ0: 0x%04x ", IO_INTC_EINT2, IO_INTC_IRQ0); lcd_putsf(0, line++, " IO_INTC_IRQ1: 0x%04x IO_INTC_IRQ2: 0x%04x ", IO_INTC_IRQ1, IO_INTC_IRQ2); lcd_puts(0, line++, "Board revision:"); switch (IO_BUSC_REVR) { case 0x0010: lcd_puts(0, line++, " DM320 Rev. A"); break; case 0x0011: lcd_puts(0, line++, " DM320 Rev. B/C"); break; default: lcd_puts(0, line++, " Unknown DM320 Chip ID"); } #if defined(MROBE_500) line++; #endif oldline=line; while(!done) { line = oldline; #if defined(MROBE_500) button = button_get(false); button&=~BUTTON_REPEAT; if (button == BUTTON_POWER) done=true; if(button==BUTTON_RC_PLAY) address+=0x01; else if (button==BUTTON_RC_DOWN) address-=0x01; else if (button==BUTTON_RC_FF) address+=0x800; else if (button==BUTTON_RC_REW) address-=0x800; #else button = button_get_w_tmo(1); if(button & BUTTON_POWER) done = true; #endif lcd_puts(0, line++, "[Rockbox info]"); lcd_putsf(0, line++, "current tick: %08x Seconds running: %08d", (unsigned int)current_tick, (unsigned int)current_tick/100); #if defined(MROBE_500) lcd_putsf(0, line++, "Address: 0x%08x Data: 0x%08x", (unsigned int)address, *address); lcd_putsf(0, line++, "Address: 0x%08x Data: 0x%08x", (unsigned int)(address+1), *(address+1)); lcd_putsf(0, line++, "Address: 0x%08x Data: 0x%08x", (unsigned int)(address+2), *(address+2)); #endif lcd_update(); } return false; }